1997-2008 Touring Featured Kits

• Save $685+ on paint
• Normally $3,835+
• Limited time offer
• Painted in 49 OEM Colors
• Free Shipping

Savings: Save $685+ on paint when buying your Complete Rear End Kit painted in one of 49 different OEM colors. Act now to save big on your next custom project plus receive FREE shipping.

This awesome kit features all of our favorite bolt-on parts for your 1997-2024 Touring bike. Save money and get free shipping when buying this complete kit as one package. All of these parts are pre-drilled, pre-fit, and designed to bolt-on, snap-in & plug-in for your new project.

Rear Fender: Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. The Summit Fender installs between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

Stretched Bags: Bad Dad's Edge Series Stretched Saddlebags feature a tapered outside edge for a sleek look with increased lean-angle for a modern look & harder cornering. These Stretched Saddlebags are each pre-drilled and pre-fit to make this a simple bolt-on replacement for your original bags. You will reuse your stock saddlebag lids and hardware. All of Bad Dad's Stretched Bags are finished in final primer which is ready to go directly to paint.

Taillights: Bad Dad now offers five custom taillight options for the back of your bagger project. Choose our Bagger Strip LEDs or upgrade with our CNC cut 808 Taillight, 905 Taillight, 957 Taillight and 992 Taillight designs to add a custom touch to your custom project. All our custom taillights are CNC cut from billet aluminum and feature premium quality LEDs. All our taillight designs are available in your choice of chrome or gloss black.

Stretched Side Covers: Finish off your rear end project with a set of Bad Dad's Stretched Side Covers. These snap-in side covers are built with the mounting pins installed so these easily replace your original side covers. Choose our Edge Series Side Covers to match our Classic Series Tank Shroud, your stock tank, or any other aftermarket tank. Choose our Competition Series Side Covers if you are also using our Competition Series Tank Shroud.

Premium Plate Frame: Our Premium Plate Frame is CNC cut from 6061 billet aluminum and is available in gloss black and chrome finish options. Our Plate Frame features a row of built-in LEDs for illuminating your license plate and is designed to match with our included plug-n-play wiring harness.

Wiring Harness: This kit includes Bad Dad's Upgraded Wiring Harness. This plug-n-play wiring harness features a built-in load equalizer and enables your LED Taillights to perform as run lights, brake lights, and turn signals.

Taillights Installation: Order this complete kit and Bad Dad will custom cut your fender for your new taillights for free.

Free Shipping: Purchase this complete kit and receive free shipping on these items within the continental United States. Orders to Alaska, Hawaii, Canada, and other international destinations will ship at a reduced rate.

Paint: All our painted parts are painted with Genuine OEM Harley-Davidson paint by our in-house paint staff. We paint for several Harley-Davidson dealerships so we know you'll love anything we paint for you. Choose your original OEM color below to have us paint your new parts. Don't see your OEM color? Send us a message to see if we have your color available.

Compatibility Note: The Edge Series Saddlebag is designed to use the 2014-2023 style one-touch lid & latch hardware. These bags are completely pre-drilled & pre-fit to use all the 2014-2023 components. You can also convert to this style lid & latch on any 1997-2008, 2009-2013, and 2024 Touring model by using the 2014-2023 lid & latch components. Contact Bad Dad for more info about this conversion for your 1997-2013 or 2024 Touring model.

Detachable Accessories: 2014-2024 Models are compatible with all detachable accessories, including backrest, sissy bar, luggage rack, and Tour Pack. 2009-2013 Models are compatible with detachable backrest, sissy bar, and luggage rack. 2009-2013 Models are compatible with 2009-2013 Detachable Tour Pack Rack but requires use of 2014-2023 Tour Pack Trunk. 1997-2008 Models are compatible with detachable backrest, sissy bar, and luggage rack. 1997-2008 Models are compatible with fixed-mount Tour Pack Rack but must use custom detachable rack if detach function is required. 1997-2008 Models require use of 2014-2023 Tour Pack Trunk. Contact Bad Dad for more information regarding this if needed.

Made in the USA: All of the parts in this custom kit are proudly designed, built, machined, finished, and packaged in the USA.

• Fits 2008-2013 Touring
• Choice of three fenders
• Includes billet fork sliders
• No fork change required
• Choice of raw, black or chrome finish

Bad Dad's Wide Tire Kit lets you put 180mm of performance rubber on the front of any 2008-2013 Touring model. Get the look and performance of a fat front tire for the front of your bagger project! This complete kit is compatible with an 18x5.5 wheel and 180/55-18 tire. Wheel and tire not included.

Kit includes:

• Injection Molded Front Fender
• Choose from our Wrap, FL, or Hybrid fender designs
• Custom CNC'd Billet Fork Sliders
• Custom fender installation hardware

This complete kit is designed as a simple bolt-on kit with all the included components for your install. This kit installs using your existing lower fork legs. Bad Dad's kit for the 2008-2013 Touring models uses our injection molded technology for your choice of our Wrap Fender, FL Fender, or Hybrid Fender, each of which are designed specifically for your fat 180mm tire. This kit features custom CNC'd billet fork sliders and fender installation hardware.

Optional Fork Leg Upgrade: Now is the perfect time to upgrade your bike to black or chrome fork legs if you're still using the original cast lower legs. Upgrade your project with a set of gloss black or chrome lower fork legs by using the drop-down menu below. Bad Dad sources a set of OEM lower fork legs which Bad Dad machines off the original casting marks. These lower legs are then finished in gloss black powdercoat or a show chrome finish. You also have your choice of dual brake caliper or single brake caliper configurations in which Bad Dad machines off the original brake caliper mount from the right-side fork leg. Upgrading your fork legs is an optional upgrade but not required to use this kit. You can use your original fork legs with Bad Dad's Wire Tire Kit for the 2008-2013 models.

Available in raw, black, or chrome finishes.

Note: This kit is designed to use your existing OEM lower fork legs unless suggesting certain upgrade options below.

All of Bad Dad's custom parts are proudly made, milled, coated, assembled, and packaged in the USA.

• Save 100 dollars on full kit
• Includes forward control brake & shifter, front boards, and choice of passenger pegs or boards
• Fits Touring & Softail

Upgrade your Street Glide, Road Glide, Electra Glide, Road King, or Softail with Bad Dad's Street Series Floorboards and Forward Control Kit. This great kit uses Bad Dad's Street Series Floorboards and combines them with Bad Dad's Forward Controls. The shift and brake pegs feature inset rubber which looks great, provides superior grip, and matches the inset rubber of the Street Series Boards.

This complete kit includes:

• Street Series Front Floorboards with floorboard mounts
• Your choice of matching Street Series Passenger Boards or 900 Series Passenger Pegs
• Two shift arms, two shift pegs, inner shift arm, and shift arm spacer
• Brake arm, brake peg, brake arm tube, brake actuator, and custom brake nut
• All necessary mounting hardware

These custom floorboards and forward controls are CNC machined from 6061 aircraft grade billet aluminum and are available in black powdercoat & chrome. Bad Dad's floorboards are finished with a high-quality custom cut rubber insert for a great look and comfortable ride. Your order includes all of the appropriate mounting hardware for your Street Glide, Road Glide, Electra Glide, or Road King.

Bad Dad's Forward Controls are adjustable so you can set the positioning of the controls while also moving your controls forward 1" for more foot space. This custom kit includes the entire shift arm & brake arm assemblies for installing this setup on your Bagger project.

Floorboard Size: Length: 17-1/2". Width at widest point: 6". Thickness: 1/2" billet.

Fits: 1997-current Touring models and 2000-2017 Softail models.

Use this custom floorboard & forward control kit on any Street Glide, Road Glide, Electra Glide, Ultra, Road King or Softail. All of Bad Dad's custom parts are proudly designed, machined, coated, and packaged in the USA.