Softail Saddlebag Bracket Kit
Print Instructions
This kit has been modified from it's original application to facilitate the installation of the Bad Dad's Stretched Saddlebags and the one of Bad Dad's custom rear fenders onto the Harley Davidson Softail ® platform. The addition of any Stretched Saddlebags WILL likely require an alternative turn signal arrangement (not included). On applications where Bad Dad's Softail Fender Cover will not be used, the rear turn signals will still need to be removed from struts and on EVO FLSTC®, turn signal bar will need to be relocated. This kit may not work with rear axle covers. This Bracket Kit will work with rigid or quick release sissy bar side plates. Bad Dad's Fender Cover will not work with sissy bar side plates. Bad Dad's Summit Fender will work with sissy bar side plates.. Note: (1) This kit does not include the Harley Davidson Rubber Isolators (P.N. 11464) (QTY 4) nor does it include the Harley Davidson Saddlebag Support Cushions (P.N. 90764-93) (QTY 4). These rubber parts must be used in order to obtain proper Saddlebag fitment. (2) Exhaust pipes must be lower than rear axle. (3) On 2008-Current Softail models, remove the rear axle and install from the opposite side of the bike. Add the 1 1/4" spacer between the inside of the frame and the lower bag rail on the left side. (4) Loctite everything. (5) Check tire clearance before riding. |
||||||||||||||||||
Parts List |
||||||||||||||||||
|
- Adjustable bumper bracket
- Lower saddlebag rail
- Spacers
- Upper saddlebag rail
These photos depict the hooks after they have been installed.