Credit Cards Accecpted

ad for summit_fender.jpg

Featured Products

New.gif
BadDadOriginal.gif

   
   
   
  
Competition Series Dash - $145.00
Fits
  • Custom molded bodyline
  • Low profile dash design
  • Hidden lower mounting tab
  • Fits 2008-2015 Touring
  • Bad Dad's Competition Series Dash is a great way to bring extra styling to the top of your gas tank.

    This dash fits the 6-gallon tanks found on the 2008+ Touring models and will fit both stock gas tanks and tanks utilizing Bad Dad's Stretched Tank Shrouds.

    Mounting:Bad Dad's Dash mounts without any visible mounting hardware for a truly clean and custom look. Use one of Bad Dad's custom two-piece gas caps to serve as the attachment point for the top of the dash. Then use the pre-installed lower mounting tab to securely attach the bottom of the dash.

    This Dash will not fit Road King models due to the center mounted speedometer/warning light cluster. All holes are pre-drilled and rubber gasket is included. Proudly made in the USA.



    Price: $145.00




    BadDadOriginal.gif
    New.gif

       
       
       
      
    Competition Series Stretched Tank Shroud - $395.00
    Fits
  • Custom molded bodyline
  • Flows into side cover
  • Fits over stock tank
  • Available for 2008-2015 Touring
  • Bad Dad's Competition Series Tank Shroud is a great way to add an entirely new level of styling to your Bagger project. The Competition Series Tank features a custom bodyline that flows smoothly into your motorcycle's side cover.

    Bad Dad's Competition Series Tank Shroud is a simple cover that installs over the top of your stock gas tank. The installation of the Tank Shroud completely eliminates the stress of having to pressure test and seal coat traditional aftermarket or hand stretched tanks. Additionally, almost no downtime is wasted while upgrading your Bagger's appearance since the shroud does not even require removal of the factory tank.

    Bad Dad's stretched tank shroud is made from the same thick, rigid hand laid fiberglass for which we have become known. The shroud is finished in a blemish free gel coat that is ready for paint with the lightest surface prep.

    Available for 2008-2015 Road King, Street Glide, Electra Glide, Ultra Classic & Road Glide models using the OEM 6-gallon tank. Compatible with your OEM dash or one of Bad Dad's custom dash panels. The OEM gas tank is not included; only shown here for installation & fitment reference.

    Seats: The Competition Series Tank Shroud is designed to be used with Bad Dad's Competition Seat, Bad Dad's Competition Seat Pan, or Danny Gray's Weekday Seat. You can order your new tank designed for these seat options so your installation will require no cutting or trimming of the tank or seat. You can also order your new tank untrimmed if you want to use a different seat of your choice (modifications & fitment may vary for different seats).

    All of Bad Dad's bagger gas tank products are proudly made in the USA.


    Price starts at $395.00



    Would you also like to add...




    BadDadOriginal.gif
    New.gif

       
       
       
      
    Classic Series Stretched Tank Shroud - $395.00
    Fits
  • Classic, streamlined styling
  • Fits over stock tank
  • Available for 2008-2015 Touring
  • Check out this version of one of Bad Dad's favorite Bagger upgrades!

    Bad Dad's Classic Series Tank Shroud is a simple cover that installs over the top of your stock gas tank. The installation of the Tank Shroud completely eliminates the stress of having to pressure test and seal coat traditional aftermarket or hand stretched tanks. Additionally, almost no downtime is wasted while upgrading your Bagger's appearance since the shroud does not even require removal of the factory tank.

    Bad Dad's stretched tank shroud is made from the same thick, rigid hand laid fiberglass for which we have become known. The shroud is finished in a blemish free gel coat that is ready for paint with the lightest surface prep.

    Available for 2008-2015 Road King, Street Glide, Electra Glide, Ultra Classic & Road Glide models using the OEM 6-gallon tank. Compatible with your OEM dash or one of Bad Dad's custom dash panels. The OEM gas tank is not included; only shown here for installation & fitment reference.

    Seats: The Classic Series Tank Shroud is designed to be used with Bad Dad's Competition Seat, Bad Dad's Competition Seat Pan, or Danny Gray's Weekday Seat. You can order your new tank designed for these seat options so your installation will require no cutting or trimming of the tank or seat. You can also order your new tank untrimmed if you want to use a different seat of your choice (modifications & fitment may vary for different seats).

    All of Bad Dad's bagger gas tank products are proudly made in the USA.


    Price starts at $395.00



    Would you also like to add...




    New.gif
    BadDadOriginal.gif

        Street Glide chin spoiler
       
    Road King chin spoiler     Custom chin spoiler
      
    Classic Series Chin Spoiler - $250.00
    Fits

    Add some extra color to the front of your bike with Bad Dad's Classic Series Chin Spoiler.

    This custom chin spoiler is designed to fill the gaps between the frame rails while also retaining the functionality of the OEM oil cooler. Bad Dad's Classic Series Chin Spoiler is a great bolt-on part for all 1997-current Touring models. This composite part includes all necessary mounting hardware and is finished in a blemish-free gel coat that is ready for paint.

    All of Bad Dad's custom bagger parts are proudly made in the USA.


    Price starts at $250.00







       
       
       
      
    Classic Series Fairing with Flush Signals - $950.00
    Fits
  • Classic styling
  • Custom molded body line
  • Injection manufactured
  • Pre-drilled bolt-on fit with 17" flush turn signals
  • Bad Dad's Classic Series Fairing is now available with flush mounted turn signals to really clean up the front of your custom bagger.

    This version of the Classic Series Fairing features a pair of flush mounted turn signals which are bodyworked completely smooth into the fairing. The custom bodywork creates a very custom look and allows you to remove those clunky turn signals from the front of your bagger.

    Bad Dad's Classic Series Fairing is a complete bolt-on replacement for all 1997-2013 Touring models with fork mounted fairings. This custom fairing is injection molded for a great fit and finish that works with your factory windshield, windshield trim, and other accessories. Your new fairing will be delivered with all of the lights installed, the bodywork complete, and the part will be ready to go directly to paint.

    This custom fairing and all of Bad Dad's other custom bagger parts are proudly made in the USA.

    Note:The flush mounted turn signals are mounted on the backside of the fairing's custom bodyline. The size and location of our custom turn signals is designed to work with OEM & OEM size speakers. Interference may exist with the turn signal and an aftermarket speaker that is too large.



    Price: $950.00





       
       
       
      
    992 Front Floorboards - $375.00 - $395.00
    Fits

    Bad Dad's popular 992 Front Floorboards are now available! These custom floorboards are CNC machined from 6061 aircraft grade billet aluminum and are available in raw, black powdercoat & chrome. Bad Dad's floorboards are finished with a high-quality custom cut rubber insert for a great look and comfortable ride.

    The custom 992 Floorboards are available for Touring and Road Star models and include all of the appropriate mounting hardware for your Street Glide, Road Glide, Electra Glide, Road King, or Road Star. Bad Dad's 993 Passenger Boards and 900 Series Brake Pedal & Shift Pegs are available to complete the set.

    Measurements: Length: 16-9/16". Width at widest point: 5-1/4". Thickness: 1/2" billet.

    All of Bad Dad's custom billet bagger parts are proudly machined in the USA.


    Price starts at $375.00



    Would you also like to add...




    Pre-DrilledPre-Fit.gif
    InStock.gif
    Blemish-FreeGelCoat.gif

       
       
       
      
    21" Wrap Front Fender - $295.00 - $335.00
    Fits Touring, Softail
  • Pre-drilled mounting holes
  • Bolt-on fit
  • Injection molded
  • Includes chrome spacers
  • Fitment for 2014 models
  • Let Bad Dad help you show off that custom front wheel!

    Bad Dad's 21" Wrap Fenders use the newest injection technology to give you a fender that is extremely strong, super durable, and fits great. You and your painter will love this front fender!

    This custom injected fender is available for 1986-current Touring & all FL Softail models. Your order will include the correct mounting spacers for your application. The 21" Fender is designed to fit a Metzeler 120/70-21 tire. The 21" Wrap Fender is also available undrilled without spacers for a custom application. If ordering for a non-FL model, we recommend ordering the undrilled version of this fender.

    All of Bad Dad's custom parts are proudly made in the USA.


    Price starts at $295.00







       
       
       
      

     
    All-in-One Summit Fender - $595.00
    Fits Touring
  • Replacement Fender
  • Leaves Chrome Frame Covers Exposed
  • Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. The All-in-One Summit Rear Fender features a custom run light, brake light, turn signals, and license plate mount. The taillight is sold separately from the fender.

    The Summit Rear Fender is designed to install between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

    This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

    • Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
    • Taillights: The optional custom taillight functions as a run light, brake light, and turn signals, and includes a plug-n-play wiring harness with a built-in load equalizer.
    • License Plate: The license plate mount and license plate lights are built into the optional taillight assembly.
    • Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
    • Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
    • Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
    • Fits: Available for 1997-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

    Taillight sold separately. All of Bad Dad's custom parts are proudly made in the USA.


    Price starts at $295.00


    Pipe Options:         






       
       
       
      

     
    Bagger All-in-One Rear Fender - $325.00
    Fits Touring
  • Fender Overlay
  • Covers Frame Rails
  • Can be used as Replacement Fender by adding Fender Eliminator Kit
  • Bad Dad's newest Stretched Wide Rear Fender provides a new twist on an old solution!

    Using the same features as Bad Dad's other rear fender covers, this fender also includes a recessed area to french this very popular taillight assembly. This taillight assembly performs your run light, brake light, and turn signal functions, and also holds your license plate to help cover all of your state required lighting functions! Taillight is sold separately from the fender.

    Bad Dad's custom fenders are made from Bad Dad's own molds and feature:

    • Quality: High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
    • Taillights: The All-in-One Fender can be ordered with or without the All-in-One Taillight. If the light is ordered, this custom light performs your bagger's run light, brake light, and turn signal functions.
    • License Plate: This custom fender has a built-in mount for your bagger's license plate. The All-in-One Taillight also features a row of white LEDs for illuminating your plate.
    • Wiring Harness: Included as part of the All-in-One Taillight.
    • Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
    • Detachable Hardware Retain your backrest or sissy bar with Bad Dad's Backrest Relocation Kit () and your Tour Pack by using Bad Dad's Custom Tour Pack (0).
    • Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
    • Fits: 1997-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

    Taillight sold separately. Installation of this fender will require modification to your stock fender in order to allow room for the recessed taillight housing. All-in-One Rear Fender with Taillight includes wiring harness.


    Price starts at $295.00


    Pipe Options:         



    Would you also like to add...