2014-2024 Touring Rear Fenders

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is now available with a custom license plate recess for all 2014+ models.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender installs utilizing all of your factory mounting hardware and accessories. Chrome strut cover rails? Keep 'em! Detachable backrest? Keep it! Detachable Tour Pack? Keep that too! Everything stays the same except the look of your Bagger is upgraded with this custom stretched fender.

Bad Dad's Summit Rear Fender is a handmade composite fender and is built as a 3-piece design. We consider this fender to be "a ton of fun" as its structurally engineered design has been load tested up to 2,077 pounds. This Summit Rear Fender comes with all of the mounting holes pre-drilled and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: You can drill this fender to accept your stock taillight
• License Plate: This custom fender features a recessed license plate mount that is sunken into the surface of the fender.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: 2014+ model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

Note: Product photos are shown with Bad Dad's Premium Plate Frame. This custom billet frame is not included with the fender. This chrome or black frame can be added using the dropdown menus below.

Proudly designed & made in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. The All-in-One Summit Rear Fender features a custom run light, brake light, turn signals, and license plate mount. The taillight is sold separately from the fender.

The Summit Rear Fender is designed to install between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: The optional custom taillight functions as a run light, brake light, and turn signals, and includes a plug-n-play wiring harness with a built-in load equalizer.
• License Plate: The license plate mount and license plate lights are built into the optional taillight assembly.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: Available for 2014-Current model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

Taillight sold separately. All of Bad Dad's custom parts are proudly made in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Upgrade your bagger with this custom flush mount fender. This fender uses Bad Dad's Summit Fender as a base and then features a pair of completely flush mounted LED taillights. These custom LEDs measure 10" tall and perform your bike's run light, brake light, and turn signal functions.

This custom part arrives to you with the custom tear drops built, installed, bodyworked, and ready to paint. This custom fender also features a plug-n-play wiring harness with built-in load equalizer.

This Bad Dad custom rear fender is made from Bad Dad's own mold and features:

• All the same characteristics as Bad Dad's Summit Rear Fender.
• Flush mounted LED turn signals perform run, brake, and turn signals.
• Recessed license plate mounting.
• Includes Bad Dad's Upgraded Wiring Harness pre-wired into fender for easy plug-n-play.
• Fits 2014+ model year Road King, Electra Glide, Street Glide, and Road Glide.
• Ability to retain your detachable accessories.

Note: this includes the Summit Fender & installation of taillights with the Upgraded Wiring Harness. This fender will be delivered in final primer & ready for paint. Stretched Bags, Premium Plate Frame, and custom paint work sold separately.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. This custom fender includes Bad Dad's 957 Taillights and the correct wiring harness for this project. Bad Dad also offers two custom license plate frame options which are sold separately.

The Summit Rear Fender is designed to install between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: The 957 Taillights on this setup are designed to operate as run lights, brake lights, and turn signals.
• Wiring Harness: Complete plug-n-play wiring harness is included.
• License Plate: Bad Dad offers both its stainless steel frame and its custom billet frame, which is available in black or chrome.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: Available for 2014-Current model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All parts will be delivered in a smooth surface finish that is ready to go to paint with no bodywork needed. Paint not included.

All of Bad Dad's custom parts are proudly made in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. This custom fender includes Bad Dad's 992 Taillights and the correct wiring harness for this project. Bad Dad also offers two custom license plate frame options which are sold separately.

The Summit Rear Fender is designed to install between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: The 957 Taillights on this setup are designed to operate as run lights, brake lights, and turn signals.
• Wiring Harness: Complete plug-n-play wiring harness is included.
• License Plate: Bad Dad offers both its stainless steel frame and its custom billet frame, which is available in black or chrome.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: Available for 2014-Current model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All parts will be delivered in a smooth surface finish that is ready to go to paint with no bodywork needed. Paint not included.

All of Bad Dad's custom parts are proudly made in the USA.

• Replacement Fender
• Same length as CVO and 2018-2023 Special models

Bad Dad's CVO Rear Fender is now available for your 2014-2023 Touring model. This custom fender is designed specifically to match your CVO saddlebags and the stretched bags found on the new Special models. This bolt-on replacement fender features a recessed plate mount and molded exhaust cuts. This fender is pre-drilled and pre-fit for an easy replacement fit and is compatible with all of your detachable docking accessories.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of your bagger. Bad Dad's Summit Rear Fender is a handmade composite fender and is built as a 3-piece design. We consider this fender to be "a ton of fun" as its structurally engineered design has been load tested up to 2,077 pounds. This custom rear fender comes with all of the mounting holes pre-drilled and is finished in a smooth, blemish free gel coat.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: Use any of Bad Dad's custom taillight options or custom fit your own taillight.
• License Plate: This custom fender features a recessed license plate mount that is sunken into the surface of the fender.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Fits: 2014+ model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

Note: Product photos are shown with Bad Dad's Premium Plate Frame. This custom billet frame is not included with the fender. This chrome or black frame can be added using the dropdown menus below.

Proudly designed & made in the USA.

• Rear Fender
• Lights, Wiring & Plate Frame
• Free Light Install
• Choice of Speaker Lids or Side Covers

This awesome kit features several of our favorite bolt-on parts for your 2014+ Touring bike. Save money and get free shipping when buying our Complete Race Series Fender Kit as one package. All of these parts are pre-drilled, pre-fit, and designed to bolt-on, snap-in & plug-in for your new project.

Rear Fender: Bad Dad's Race Series Rear Fender is now available for your 2014-2023 Touring model. This custom fender is designed specifically to match your CVO saddlebags and the stretched bags found on the new Special models. This bolt-on replacement fender features a recessed plate mount and molded exhaust cuts. This fender is pre-drilled and pre-fit for an easy replacement fit and is compatible with all of your detachable docking accessories.

Taillights: Bad Dad now offers two custom taillight options to light up your bagger. Bad Dad's 905 Taillight, 957 Taillight and 992 Taillight designs are great ways to add a custom touch to your custom project. These custom taillights are CNC cut from billet aluminum and feature incredibly bright LEDs. Both designs are available in black or chrome.

Premium Plate Frame: Our Premium Plate Frame is CNC cut from 6061 billet aluminum and is available in gloss black and chrome finish options. Our Plate Frame features a row of built-in LEDs for illuminating your license plate and is designed to match with our included plug-n-play wiring harness.

Wiring Harness: This kit includes Bad Dad's Upgraded Wiring Harness. This plug-n-play wiring harness features a built-in load equalizer and enables your 905, 957, or 992 Taillights to perform as run lights, brake lights, and turn signals.

Taillights Installation: Order this complete kit and Bad Dad will custom cut your fender for your new taillights for free.

Free Shipping: Purchase this complete kit and receive free shipping on these items within the continental United States. Orders to Alaska, Hawaii, Canada, and other international destinations will ship at a reduced rate.

Option 1: Stretched Side Covers Want to add a set of our Stretched Side Covers to finish off your rear end project? Add a set for just 350 dollars with free shipping for a total savings of 100 dollars. These snap-in side covers are built with the mounting pins installed so these easily replace your original side covers. Choose our Classic Series Side Covers to match our Classic Series Tank Shroud, your stock tank, or any other aftermarket tank. Choose our Competition Series Side Covers if you are also using our Competition Series Tank Shroud.

Option 2: Speaker Lids Need the perfect set of Speaker Lids for your Bad Dad project? Add a set of our Competition Series Speaker Lids for just 350 dollars or a set of our Competition Series Speaker Lids with LEDs for just 690 dollars with free shipping, which is a savings of an additional 110 dollars. Our Competition Series Speaker Lids are a complete bolt-on speaker lid which can hold any 5x7 or 6x9 speaker.

All of the parts in this custom kit are proudly designed, built, machined, finished, and packaged in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed
• Bad Dad's Competition Series

Bad Dad's Competition Rear Fender is a complete replacement fender that is designed to be used with its Competition Series Stretched Bags.

This custom stretched fender bolts between your bagger's frame rails and features stretched filler panels to really clean up the back of your bike. Bad Dad's Competition Rear Fender installs by utilizing all of your factory mounting hardware and accessories. Chrome strut cover rails? Keep 'em! Detachable backrest? Keep it! Detachable Tour Pack? Keep that too! Everything stays the same except the look of your Bagger is upgraded with this custom stretched fender.

Bad Dad's Competition Rear Fender is a handmade composite fender and is built as a 3-piece design. This fender has been load tested to support 2,077 pounds of pressure without any deflection. The Competition Rear Fender comes with all of the mounting holes pre-drilled and is finished in a smooth, blemish free gel coat. The Competition Rear Fender is designed to work with Bad Dad's Competition Series Saddlebags.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• License Plate: This custom fender features a recessed license plate mount that is sunken into the surface of the fender. Use Bad Dad's Premium Plate Frame (shown here) or Stainless Steel License Plate Bezel to complete the recessed look (all license plate mounts are available separately)
• Exhaust: Only available with no exhaust openings due to the 9" rearward stretch.
• Detachable Hardware: This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating.
• Fits: 2014+ model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All Competition Series Parts are proudly designed & manufactured in the USA.

Finish off your custom bagger fender with Bad Dad's Premium License Plate Frame.

This custom plate frame is CNC cut and features a complete row of LEDs to illuminate your license plate. This custom frame is available in gloss black and chrome finishes.

All of Bad Dad's custom billet parts are proudly milled in the USA.

Note: The Premium Plate Frame is CNC cut specifically for Bad Dad's custom fenders. It will not work with other applications. You will not be able to use this custom part if you are not using a Bad Dad product.