2009-2013 Touring Rear Fenders

• Fender Overlay
• Covers Frame Rails
• Can be used as Replacement Fender by adding Fender Eliminator Kit

Fill the gaps between your saddlebags and smooth out the rear of your custom Bagger with this custom wide rear fender. This fender's stretch is designed to match perfectly with a set of Bad Dad's Stretched Saddlebags or Saddlebag Extensions.

Bad Dad's custom fenders are made from Bad Dad's own molds and feature:

• High quality, hand laid fiberglass.
• Extremely rigid fiberglass with a smooth gelcoat that is always pinhole free.
• Increased flanges on wide fender for smoother look.
• Exhaust ports available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Compatible with detachable backrests and sissy bars.
• Lengthened fender that looks good with both solo and two-up seating.
• Longer fender hides frame rails and factory wiring with solo and two-up style seating.
• Fits 1997-2013 model year Road King, Electra Glide, Street Glide, and Road Glide.

All of Bad Dad's custom fenders are proudly made in the USA.

• Fender Overlay
• Covers Frame Rails
• Can be used as Replacement Fender by adding Fender Eliminator Kit

Fill the gaps between your saddlebags and smooth out the rear of your custom Bagger with this custom wide rear fender. This fender's stretch is designed to match perfectly with a set of Bad Dad's Stretched Saddlebags or Saddlebag Extensions. The recessed area in this fender is designed to be utilized for mounting your license plate.

Bad Dad's custom fenders are made from Bad Dad's own molds and feature:

• High quality, hand laid fiberglass.
• Extremely rigid fiberglass with a smooth gelcoat that is always pinhole free.
• Increased flanges on wide fender for smoother look.
• Exhaust ports available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Compatible with detachable backrests and sissy bars.
• Lengthened fender that looks good with both solo and two-up seating.
• Longer fender hides frame rails and factory wiring with solo and two-up style seating.
• Fits 1997-2013 model year Road King, Electra Glide, Street Glide, and Road Glide.

Note: Product photos are shown with Bad Dad's Premium Plate Frame. This custom billet frame is not included with the fender. This chrome or black frame can be added using the dropdown menus below.

Proudly designed & made in the USA.

• Fender Overlay
• Covers Frame Rails
• Can be used as Replacement Fender by adding Fender Eliminator Kit

Bad Dad's newest Stretched Wide Rear Fender provides a new twist on an old solution!

Using the same features as Bad Dad's other rear fender covers, this fender also includes a recessed area to french this very popular taillight assembly. This taillight assembly performs your run light, brake light, and turn signal functions, and also holds your license plate to help cover all of your state required lighting functions! Taillight is sold separately from the fender.

Bad Dad's custom fenders are made from Bad Dad's own molds and feature:

• Quality: High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: The All-in-One Fender can be ordered with or without the All-in-One Taillight. If the light is ordered, this custom light performs your bagger's run light, brake light, and turn signal functions.
• License Plate: This custom fender has a built-in mount for your bagger's license plate. The All-in-One Taillight also features a row of white LEDs for illuminating your plate.
• Wiring Harness: Included as part of the All-in-One Taillight.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware Retain your backrest or sissy bar with Bad Dad's Backrest Relocation Kit.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

Taillight sold separately. Installation of this fender will require either (a) modification to your stock fender in order to allow room for the recessed taillight housing (b) or use of Bad Dad's Fender Eliminator Kit. The All-in-One Taillight includes the correct wiring harness for your selected application.

• Fender Overlay
• Covers Frame Rails
• Can be used as Replacement Fender by adding Fender Eliminator Kit

Add some style to your Bagger with Bad Dad's Flush Tear Drop Fender. This fender uses Bad Dad's popular Bagger Fender as a base and then features a pair of completely flush mounted LED taillights. These custom LEDs measure 10" tall and perform your bike's run light, brake light, and turn signal functions.

This custom part arrives to you with the custom tear drops built, installed, bodyworked, and ready to paint. This custom fender also features a plug-n-play wiring harness with built-in load equalizer.

This Bad Dad custom rear fender is made from Bad Dad's own mold and features:

• All the same characteristics as Bad Dad's Bagger Fender.
• Flush mounted LED turn signals perform run, brake, and turn signals.
• Recessed license plate mounting.
• Includes Bad Dad's Upgraded Wiring Harness pre-wired into fender for easy plug-n-play.
• Fits 1997-2013 model year Road King, Electra Glide, Street Glide, and Road Glide.
• Retain your backrest or sissy bar with Bad Dad's Backrest Relocation Kit.

Note: this includes the Bagger Fender & installation of taillights with the Upgraded Wiring Harness. This fender will be delivered in final primer & ready for paint. Stretched Bags, Premium Plate Frame, and custom paint work sold separately.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. The Summit Fender installs between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: You can drill this fender to accept your stock taillight.
• License Plate: This completely smooth fender does not feature a license plate mount. Many customers using this fender often use their factory taillight assembly with built-in plate mount or will make their own custom mount. Some customizers also like to add Bad Dad's Original Hide-a-Plate for an even more custom plate mount.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All of Bad Dad's custom bagger parts are proudly made in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is now available with a custom license plate recess.

The Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. The Summit Fender installs between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: You can drill this fender to accept your stock taillight
• License Plate: This custom fender features a recessed license plate mount that is sunken into the surface of the fender.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

Note: Product photos are shown with Bad Dad's Premium Plate Frame. This custom billet frame is not included with the fender. This chrome or black frame can be added using the dropdown menus below.

Proudly designed & made in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Upgrade your bagger with this custom flush mount fender. This fender uses Bad Dad's Summit Fender as a base and then features a pair of completely flush mounted LED taillights. These custom LEDs measure 10" tall and perform your bike's run light, brake light, and turn signal functions.

This custom part arrives to you with the custom tear drops built, installed, bodyworked, and ready to paint. This custom fender also features a plug-n-play wiring harness with built-in load equalizer.

This Bad Dad custom rear fender is made from Bad Dad's own mold and features:

• All the same characteristics as Bad Dad's Summit Rear Fender.
• Flush mounted LED turn signals perform run, brake, and turn signals.
• Recessed license plate mounting.
• Includes Bad Dad's Upgraded Wiring Harness pre-wired into fender for easy plug-n-play.
• Fits 2009-2013 model year Road King, Electra Glide, Street Glide, and Road Glide.
• Ability to retain your detachable accessories.

Note: this includes the Summit Fender & installation of taillights with the Upgraded Wiring Harness. This fender will be delivered in final primer & ready for paint. Stretched Bags, Premium Plate Frame, and custom paint work sold separately.

• Replacement Fender
• Use with CVO and 2018-2019 Special model saddlebags

Bad Dad's Race Series Rear Fender is now available for your 2009-2013 Touring model. This custom fender is designed specifically to match your CVO saddlebags, the stretched bags found on the new Special models, and Bad Dad's Race Series Saddlebags. This bolt-on replacement fender features a recessed plate mount and molded exhaust cuts. This fender is pre-drilled and pre-fit for an easy replacement fit and is compatible with all of your detachable docking accessories.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of your bagger. Bad Dad's Summit Rear Fender is a handmade composite fender and is built as a 3-piece design. We consider this fender to be "a ton of fun" as its structurally engineered design has been load tested up to 2,077 pounds. This custom rear fender comes with all of the mounting holes pre-drilled and is finished in a smooth, blemish free gel coat.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: Use any of Bad Dad's custom taillight options or custom fit your own taillight.
• License Plate: This custom fender features a recessed license plate mount that is sunken into the surface of the fender.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Fits: 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

Note: Product photos are shown with Bad Dad's Premium Plate Frame. This custom billet frame is not included with the fender. This chrome or black frame can be added using the dropdown menus below.

Proudly designed & made in the USA.

• Rear Fender
• Lights, Wiring & Plate Frame
• Free Light Install
• Choice of Speaker Lids or Side Covers

This awesome kit features several of our favorite bolt-on parts for your 2009-2013 Touring bike. Save money and get free shipping when buying our Complete Race Series Fender Kit as one package. All of these parts are pre-drilled, pre-fit, and designed to bolt-on, snap-in & plug-in for your new project.

Rear Fender: Bad Dad's Race Series Rear Fender is now available for your 2009-2013 Touring model. This custom fender is designed specifically to match your CVO saddlebags and the stretched bags found on the new Special models. This bolt-on replacement fender features a recessed plate mount and molded exhaust cuts. This fender is pre-drilled and pre-fit for an easy replacement fit and is compatible with all of your detachable docking accessories.

Taillights: Bad Dad now offers two custom taillight options to light up your bagger. Bad Dad's 905 Taillight, 957 Taillight and 992 Taillight designs are great ways to add a custom touch to your custom project. These custom taillights are CNC cut from billet aluminum and feature incredibly bright LEDs. Both designs are available in black or chrome.

Premium Plate Frame: Our Premium Plate Frame is CNC cut from 6061 billet aluminum and is available in gloss black and chrome finish options. Our Plate Frame features a row of built-in LEDs for illuminating your license plate and is designed to match with our included plug-n-play wiring harness.

Wiring Harness: This kit includes Bad Dad's Upgraded Wiring Harness. This plug-n-play wiring harness features a built-in load equalizer and enables your 905, 957, or 992 Taillights to perform as run lights, brake lights, and turn signals.

Taillights Installation: Order this complete kit and Bad Dad will custom cut your fender for your new taillights for free.

Free Shipping: Purchase this complete kit and receive free shipping on these items within the continental United States. Orders to Alaska, Hawaii, Canada, and other international destinations will ship at a reduced rate.

Option 1: Stretched Side Covers Want to add a set of our Stretched Side Covers to finish off your rear end project? Add a set for just 350 dollars with free shipping for a total savings of 100 dollars. These snap-in side covers are built with the mounting pins installed so these easily replace your original side covers. Choose our Classic Series Side Covers to match our Classic Series Tank Shroud, your stock tank, or any other aftermarket tank. Choose our Competition Series Side Covers if you are also using our Competition Series Tank Shroud.

Option 2: Speaker Lids Need the perfect set of Speaker Lids for your Bad Dad project? Add a set of our Competition Series Speaker Lids for just 350 dollars or a set of our Competition Series Speaker Lids with LEDs for just 690 dollars with free shipping, which is a savings of an additional 110 dollars. Our Competition Series Speaker Lids are a complete bolt-on speaker lid which can hold any 5x7 or 6x9 speaker.

All of the parts in this custom kit are proudly designed, built, machined, finished, and packaged in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed
• Bad Dad's Competition Series

Bad Dad's Competition Rear Fender is a complete replacement fender that is designed to be used with its Competition Series Stretched Bags.

This custom stretched fender bolts between your bagger's frame rails and features stretched filler panels to really clean up the back of your bike. Bad Dad's Competition Rear Fender installs by utilizing all of your factory mounting hardware and accessories. Chrome strut cover rails? Keep 'em! Detachable backrest? Keep it! Detachable Tour Pack? Keep that too! Everything stays the same except the look of your Bagger is upgraded with this custom stretched fender.

Bad Dad's Competition Rear Fender is a handmade composite fender and is built as a 3-piece design. This fender has been load tested to support 2,077 pounds of pressure without any deflection. The Competition Rear Fender comes with all of the mounting holes pre-drilled and is finished in a smooth, blemish free gel coat. The Competition Rear Fender is designed to work with Bad Dad's Competition Series Saddlebags.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• License Plate: This custom fender features a recessed license plate mount that is sunken into the surface of the fender. Use Bad Dad's Premium Plate Frame (shown here) or Stainless Steel License Plate Bezel to complete the recessed look (all license plate mounts are available separately)
• Exhaust: Available for single, dual, or no exhaust setups.
• Detachable Hardware: This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating.
• Fits: 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All Competition Series Parts are proudly designed & manufactured in the USA.

Note: Dual exhaust and single exhaust applications will require the exhaust pipe to be extended rearward in order for the exhaust to fully exit the 7" stretch of the Competition Bags. Exhaust extension hardware is not included with this part.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed
• Bad Dad's Competition Series

Bad Dad's Competition Rear Fender is a complete replacement fender that is designed to be used with its Competition Series Stretched Bags. The All-in-One version of this fender features a custom recessed run light, brake light, turn signals, and license plate mount. The taillight is sold separately from the fender.

This custom stretched fender bolts between your bagger's frame rails and features stretched filler panels to really clean up the back of your bike. Bad Dad's Competition Rear Fender installs by utilizing all of your factory mounting hardware and accessories. Chrome strut cover rails? Keep 'em! Detachable backrest? Keep it! Detachable Tour Pack? Keep that too! Everything stays the same except the look of your Bagger is upgraded with this custom stretched fender.

Bad Dad's Competition Rear Fender is a handmade composite fender and is built as a 3-piece design. This fender has been load tested to support 2,077 pounds of pressure without any deflection. The Competition Rear Fender comes with all of the mounting holes pre-drilled and is finished in a smooth, blemish free gel coat. The Competition Rear Fender is designed to work with Bad Dad's Competition Series Saddlebags.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: The optional custom taillight functions as a run light, brake light, and turn signals, and includes a plug-n-play wiring harness with a built-in load equalizer.
• License Plate: The license plate mount and license plate lights are built into the optional taillight assembly.
• Exhaust: Available for single, dual, or no exhaust setups.
• Detachable Hardware: This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating.
• Fits: 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All Competition Series Parts are proudly designed & manufactured in the USA.

Note: Dual exhaust and single exhaust applications will require the exhaust pipe to be extended rearward in order for the exhaust to fully exit the 7" stretch of the Competition Bags. Exhaust extension hardware is not included with this part.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. This custom fender includes Bad Dad's 957 Taillights and the correct wiring harness for this project. Bad Dad also offers two custom license plate frame options which are sold separately.

The Summit Rear Fender is designed to install between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: The 957 Taillights on this setup are designed to operate as run lights, brake lights, and turn signals.
• Wiring Harness: Complete plug-n-play wiring harness is included.
• License Plate: Bad Dad offers both its stainless steel frame and its custom billet frame, which is available in black or chrome.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: Available for 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All parts will be delivered in a smooth surface finish that is ready to go to paint with no bodywork needed. Paint not included.

All of Bad Dad's custom parts are proudly made in the USA.

• Replacement Fender
• Leaves Chrome Frame Covers Exposed

Bad Dad's Summit Rear Fender is a complete bolt-on replacement fender which installs in place of your original fender. This custom fender includes Bad Dad's 992 Taillights and the correct wiring harness for this project. Bad Dad also offers two custom license plate frame options which are sold separately.

The Summit Rear Fender is designed to install between the bike's frame rails and is compatible with all of your detachable docking hardware, including your backrest, sissy bar, luggage rack, and Tour Pack. All of Bad Dad's rear fenders are pre-drilled & pre-fit to make this a simple bolt-on part directly out of the box.

This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender is built from thick, handlaid fiberglass and has been load tested to 2,077 pounds of pressure. The Summit Fender installs utilizing all of your factory mounting hardware and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.

• Quality: Load tested at 2,077 pounds. High quality, hand laid fiberglass that is extremely rigid with a smooth gelcoat that is always pinhole free.
• Taillights: The 957 Taillights on this setup are designed to operate as run lights, brake lights, and turn signals.
• Wiring Harness: Complete plug-n-play wiring harness is included.
• License Plate: Bad Dad offers both its stainless steel frame and its custom billet frame, which is available in black or chrome.
• Exhaust: Available for single, dual, or no exhaust pipes so you can tailor fit the port openings to your pipes.
• Detachable Hardware This fender will support all of your stock detachable hardware items, such as your backrest, sissy bar, luggage rack, or Tour Pack. You do not need any other hardware or adapter kits for this fender.
• Other features: Lengthened bagger fender that looks good with both solo and two-up seating. The longer fender hides frame rails and factory wiring.
• Fits: Available for 2009-2013 model year baggers Road King, Electra Glide, Street Glide, and Road Glide.

All parts will be delivered in a smooth surface finish that is ready to go to paint with no bodywork needed. Paint not included.

All of Bad Dad's custom parts are proudly made in the USA.

This fender is created by starting with our Touring 4" Stretched Wide Rear Fender and then upgraded with a flush mounted brake light and flush mount license plate. A red Lexan lens is bodyworked into the fiberglass fender for that completely smooth presentation and a dual-intensity 3"x5" LED assembly is installed on the backside of the fender for run and brake light functions.

Bad Dad's custom fenders are made from Bad Dad's own molds and feature:

• High quality, hand laid fiberglass.
• All the same characteristics as our 4" Stretched Wide Rear Fender.
• Custom installed brake light that allows you to pick your own taillight design!
• Recessed license plate mounting.
• Unlimited brake light customizing options during the paint process.
• Fits 1997-current model year Road King, Electra Glide, Street Glide, and Road Glide.
• Retain your backrest or sissy bar with Bad Dad's Backrest Relocation Kit.

Combining this fender with Bad Dad's Fender Eliminator Kit will allow you to use this fender as a full bolt-on replacement fender for your stock fender. Installation of this fender as a Fender Cover will require modification to your stock fender in order to allow room for the flush mounted taillight.

All of Bad Dad's custom parts are proudly made in the USA.

Need a fender that does all of your taillight functions and also provides a place to mount your license plate? Bad Dad's newest flush mount fender provides the stretched, wide look of its most popular fender while also performing all of your required taillight duties. Use the center mounted taillight as your run and brake light, and then use the vertical lights as either (1) turn signal only, (2) turn signal and brake light, or (3) turn signal and run light.

This fender comes with all of the lenses and lights installed, and all of the bodywork completed. The fender will arrive in final primer and ready to go directly to paint. Simply test fit to your bike and add paint!

This Bad Dad custom rear fender is made from Bad Dad's own mold and features:

• All the same characteristics as Bad Dad's 4" Stretched Wide Rear Fender.
• Custom flush mounted run and brake light.
• Flush mounted turn signals.
• Recessed license plate mounting.
• Fits 1997-current model year Road King, Electra Glide, Street Glide, and Road Glide.
• Retain your backrest or sissy bar with Bad Dad's Backrest Relocation Kit.

Combining this fender with Bad Dad's Fender Eliminator Kit will allow you to use this fender as a full bolt-on replacement fender for your stock fender. Installation of this fender as a Fender Cover will require modification to your stock fender in order to allow room for the flush mounted taillight.

Use Bad Dad's Stock Fender Eliminator Kit to use any of Bad Dad's Rear Fender Covers as a dedicated rear fender. The Fender Eliminator Kit allows for removal of the stock fender and still provides all of the necessary mounting points to allow you to securely bolt on any of Bad Dad's Rear Fender Covers.

Because the stock rear fender can limit rear tire size on Touring models, Bad Dad's Stock Fender Eliminator Kit can also be used to fit larger than stock sized rear tires on the back of your Touring bike (170mm-200mm). Photos at right depict Bad Dad's Stock Fender Eliminator Kit installed on a 2008 Road Glide with a 200mm tire. Customer is responsible for providing appropriate wheel, pulley, belt/chain, etc.

Stock Fender Eliminator Kit fits 1997-current Touring models.

Note: This kit includes Bad Dad's License Plate Eliminator Bracket. If ordering this Fender Eliminator Kit, the License Plate Eliminator Bracket is not needed.

Finish off your custom bagger fender with Bad Dad's Premium License Plate Frame.

This custom plate frame is CNC cut and features a complete row of LEDs to illuminate your license plate. This custom frame is available in gloss black and chrome finishes.

All of Bad Dad's custom billet parts are proudly milled in the USA.

Note: The Premium Plate Frame is CNC cut specifically for Bad Dad's custom fenders. It will not work with other applications. You will not be able to use this custom part if you are not using a Bad Dad product.

Do you need to retain your factory backrest or sissy bar for that special someone in your life? Most likely you do. After all, these are Touring bikes and they are made to be ridden.

When working with most aftermarket rear fenders, the factory rear detachable bracket must be modified slightly in order to retain your detachable accessories. Instructions for making that modification can be found here on our Web site.

This aluminum replacement bracket is a bolt-on application that eliminates the need to modify your factory hardware. While this bracket is not required for the utilization of your Bad Dad Custom Rear Fender, it can help streamline your installation process.