Custom Tail Lights
Bad Dad's 957 Taillights are a great way to light up your custom project! These lights are the perfect fit for your rear fender or the back of your saddlebags.
The 957 Taillights are CNC'd from billet aluminum and hold a pair of super LED lights. The lights measure 9-1/2" long by 1-1/2" wide and are available in raw, black powdercoat, and chrome. An additional plug-n-play wiring harness with load equalizer is available for easy installation.
Wiring Harness Recommendations:To complete a plug-n-play unit, add Bad Dad's Upgraded Wiring Harness to make your 957 Taillights operate as run lights, brake lights, and turn signals; or add Bad Dad's Basic Wiring Harness to make your 957 Taillights operate as just brake lights and turn indicators; or feel free to use no wiring harness for a custom application.
Bad Dad's taillights are proudly milled in the USA for your Street Glide, Road Glide, Electra Glide, Road King, or Road Star.
These round LEDs are a great fit for the back of any saddlebag. Customize your flush lenses during the paint process for a completely custom setup on your Bagger.
These 3" or 4" round lights come in quantities of two and include the red Lexan lens as well as the LED light.
Recommended uses: (1) Combine one set of 3" or 4" round turn signal lights in the saddlebags with a fender mounted flush lens & flush mount brake LED, then utilize our Basic Wiring Harness; (2) combine two sets of 3" or 4" round turn signal lights mounted in the saddlebags with no fender mounted lighting; or (3) utilize only one set of flush mount 3" or 4" round turn signals in the saddlebags, no fender mounted lighting, and our Upgraded Wiring Harness to allow the saddlebags to perform run, brake & turn.
Working on a project and need a lens? This red Lexan brake lens is available as a flat 5.5"x9" piece or pre-cut and bent to the curvature of our rear fender to make installation easier. Lens includes defractor material to place between the Lexan lens and light source.
This huge LED assembly is the light we use to illuminate all of our rear fender mounted flush brake lights. This custom light utilizes a total of 80 individual LEDs that are evenly spaced for a uniform presentation. This high intensity light measures 7" wide by 4" tall and is made specifically for Bad Dad and all of our custom applications. Using our fiberglass mounting pocket as a housing, this custom LED taillight features a high and low intensity level so the light can be wired as both a run & brake light. The housings curvature is designed to mirror the shape of our wide rear fenders to make installation easier.
This fiberglass pocket is used to hold the license plate for our flush mount license plate setup. Once the flush mount license plate lens is installed, your plate is mounted into this pocket and then installed on the backside of the fender.
Add a set of license plate LED studs to both hold your plate and keep it illuminated!