Great products with excellent fit.
Please Select Your Bike Type Below To See Related ProductsThis may take a moment to load.
Dramatically improve the look and flow of your custom Bagger with Bad Dad's new Stretched Side Covers!
Bad Dad's Stretched Side Covers are a full snap-on replacement for your stock covers. Simply remove your original covers and snap these in place. No need for bonding or bodywork! Bad Dad's Stretched Side Covers are constructed from hand laid fiberglass, feature pre-installed installation studs for a simple snap-on fit, and are finished in a smooth blemish-free gel coat like all of Bad Dad's other great parts.
The Stretched Side Covers are available for 1997-current Touring models. Minor trimming of the rear edge may be required depending on the positioning of your bike's saddlebags. Our Stretched Side Covers for the 2009+ Touring models must use an "under" style header which crosses underneath the frame. Our 2009+ version is not compatible with a standard dual header.
All of Bad Dad's custom parts are proudly made in the USA.
Give your stock saddlebags that longer, lower look with the addition of a set of saddlebag extensions.
Bad Dad's custom fenders are made from Bad Dad's own molds and feature:
See Also: Stretched Saddlebag Skid Plates, Long Strokes Exhaust Pipes
Bad Dad's newest product just may be its coolest yet. This tank assembly offers exceptionally clean styling while providing an exceptionally easy install. Bad Dad's tank shroud is composed of two fiberglass tank halves. The two halves consist of an outer shell that simply installs over your pre-existing factory tank.
Installation of the shroud completely eliminates the stress of having to pressure test and seal coat traditional aftermarket or hand stretched tanks. Additionally, since the shroud does not even require removal of the factory tank, almost no downtime is wasted while upgrading your Bagger's appearance.
BD's stretched tank shroud is made from the same thick, rigid hand laid fiberglass for which we have become known. The shroud is finished in a blemish free gel coat that is ready for paint with the lightest surface prep.
The tank shroud is made to fit the 5-gallon tanks found on the 1993-2007 and the 6-gallons tanks found on the 2008+ Road King, Electra Glide, Street Glide, Ultra, and Road Glide models. This shroud is also compatible with factory seats and dash assemblies. Because the tank is fiberglass, seat modifications are not necessary as the fiberglass can be contoured to match the lines of any factory or aftermarket seat. *No modifications to seat required.*
See Also: Bagger Low Profile Dash for 6-Gallon Tanks, Bagger Low Profile Dash for 5-Gallon Tanks, Road King Low Profile Dash '94-'07
Set your Custom Bagger a little lower to the ground with a set of Bad Dad's Slammed Lowering Blocks.
Bad Dad's Slammed Lowering Blocks install easily to your Bagger's swing arm. The Slammed Lowering Blocks are very cost effective way to enhance your bike's look, and also get you lower to the ground if you need a little extra reach in your legs. The Slammed Lowering Blocks feature both a 1" and 2" drop setting.
Bad Dad's Blocks are made from cold rolled steel and are powedercoated black. Slammed Lowering Blocks fit 2002-2012 Touring models. Bad Dad's Slammed Lowering Blocks fit all Touring models with hard saddlebags but will not fit Road Kings equipped with leather or soft saddlebags.
Tired of that huge clunky latch assembly on the outside of your Harley-Davidson saddlebags? The Shaved Saddlebags is one of Bad Dad's newest innovations that allow you to take your Custom Bagger to an entirely new level!
Bad Dad's Shaved Saddlebags utilize a custom hinge assembly that allow these Stretched Saddlebags to be completely smooth on the outside with absolutely no external hardware. Not only do the Shaved Saddlebags look great when the shaved lids are closed, but they look absolutely killer when they are open!
Bad Dad's newest Stretched Wide Rear Fender provides a new twist on an old solution!
Using the same features as Bad Dad's other rear fender covers, this fender also includes a recessed area to french this very popular taillight assembly. This taillight assembly performs your run light, brake light, and turn signal functions, and also holds your license plate to help cover all of your state required lighting functions!
Taillight sold separately. Installation of this fender will require modification to your stock fender in order to allow room for the recessed taillight housing. All-in-One Rear Fender with Taillight includes wiring harness.
Bad Dad's All-in-One Summit Rear Fender is a full bolt-on replacement fender that features a custom run light, brake light, turn signals, and license plate mount.
This custom stretched fender bolts between your Bagger's frame rails and features stretched filler panels to really clean up the back of that Bagger. Bad Dad's Summit Rear Fender installs utilizing all of your factory mounting hardware and accessories. Chrome strut cover rails? Keep 'em! Detachable backrest? Keep it! Detachable Tour Pack? Keep that too! Everything stays the same except the look of your Bagger is upgraded with this custom stretched fender.
Bad Dad's All-in-One Summit Rear Fender is a handmade composite fender and is built as a 3-piece design. We consider this fender to be "a ton of fun" as its structurally engineered design has been load tested up to 2,077 pounds (testing data shown at left). This Summit Rear Fender comes with all of the mounting holes pre-drilled and is finished in a smooth, blemish free gel coat. The Summit Rear Fender is designed to work with Bad Dad's Stretched Saddlebags or 4" Saddlebag Extensions and is available with your choice of exhaust cut outs: dual, 2-into-1, or none.
They're finally here! Bad Dad's King Midas Bars are now available for your custom Road King and custom Softail projects.
Our King Midas Handlebars are made from 1-1/2" tubing for a very stout look which also makes internal wiring very easy. These custom handlebars are also master cylinder & fly-by-wire ready. Bars are available in raw, gloss black powdercoat & chrome.
The King Midas Handlebars have 5" of rise, 18" of pullback, and 38" of width from grip-to-grip. We put many miles on these bars every year and they are extremely comfortable which makes them the perfect handlebar for your Road King or Softail.
All of Bad Dad's bagger parts are proudly made in the USA.
Get a better handle on your bagger project with a set of Bad Dad's 975 Bagger Bars for your Street Glide, Electra Glide, and Ultra Classic. A custom version of these bars is also available for your Road Glide and Road King project too!
Bad Dad's 975 Bars are made from 1-1/2" tubing which looks great and simplifies internal wiring. The 975 Bars are all made from DOM mandrel bent tubing and are fly-by-wire ready. Bad Dad's bars are available in raw, gloss black powdercoat, and chrome.
Longer cables and wires will be needed with these custom handlebars. Handlebars custom drilled for your hydraulic clutch are available upon special request for your Street Glide, Electra Glide, and Ultra Classic.
Bad Dad is proud to use Amercan made brake lines and clutch cables for all of its custom handlebar projects. These are the same lines and cables we feature on all of our 12" & 14" ape hanger baggers.
Clutch cables: Cables have anti-friction inner liners with nylon adjuster inserts. Available in a chrome or black finish for your bagger.
Brake lines: Brake lines fit all 2008-current Touring models and are available in a chrome or black finish. Please select your correct brake caliper and ABS options when ordering.
Bad Dad only uses American made cables and lines for its Road King, Street Glide, Road Glide, and Electra Glide projects.
Here is the perfect match for your 966 Front Floorboards.
Bad Dad's 993 Rear Boards are CNC machined from 6061 aircraft grade billet aluminum and are available in gloss black powdercoat & chrome. Bad Dad's floorboards are finished with a high-quality custom cut rubber insert for a great look and comfortable ride.
The 993 Boards are a complete replacement floorboard. Your order includes all of the appropriate mounting hardware for your bagger.
All of Bad Dad's custom billet bagger parts are proudly machined in the USA.
Finish off your bagger's floorboard project with Bad Dad's 900 Series Brake Pedal.
This custom brake pedal is CNC machined from 6061 aircraft grade billet aluminum and is available in raw, black powdercoat & chrome. This bolt-on brake pedal is finished with a high-quality custom cut rubber insert for a great look and comfortable ride.
All of Bad Dad's bagger floorboards are proudly machined in the USA for your Road King, Street Glide, Road Glide, and Electra Glide.
Finish off your custom bagger fender with Bad Dad's Premium License Plate Frame.
This custom plate frame is CNC cut and features two complete rows of LEDs to illuminate your license plate. This custom frame is available in gloss black and chrome finishes.
All of Bad Dad's custom billet parts are proudly milled in the USA.